Quist Electronics is approved to sell and distribute parts that require ITAR certification.  ITAR, or International Traffic in Arms Regulation, administered by the US Department of State, regulates the export and import of US military defense related equipment, services and information.

and processor-based systems.

FEATURES

Power-On Reset Generator With Fixed Delay Time of 200 ms (TPS3823/4/5/8) or 25 ms (TPS3820)

Manual Reset Input (TPS3820/3/5/8)

Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824/5) and Open-Drain (TPS3828)

Supply Voltage Supervision Range:  2.5 V, 3 V, 3.3 V, 5 V

Watchdog Timer (TPS3820/3/4/8)

Supply Current of 15 μA (Typ)

SOT23-5 Package

Temperature Range: −40°C to +85°C

APPLICATIONS

Applications Using DSPs, Microcontrollers, or Microprocessors

Industrial Equipment

Programmable Controls

Automotive Systems

Portable/Battery-Powered Equipment

Intelligent Instruments

Wireless Communications Systems

Notebook/Desktop Computers

Key Applications

Key Applications

• Thermal Impedance: 0.20°C-in²/W (@25 psi)
• 150°C high temperature reliability
• Natural tack one side for ease of assembly
• Exceptional thermal performance in an insulated pad

Hi-Flow 650P is a thermally conductive phase change material, reinforced with a polyimide film that is naturally tacky on one side.The polyimide film provides a high dielectric strength and high cut through resistance. Hi-Flow 650P offers high temperature reliability ideal for automotive applications.

Hi-Flow 650P is designed for use between a high-power electrical device requiring electrical isolation from the heat sink and is ideal for automated dispensing systems.

Bergquist recommends the use of spring clips to assure constant pressure with the component interface and the heat sink. Please refer to the TO-220 thermal performance data to determine the nominal spring pressure for your application.

Typical Applications Include

• Spring / clip-mounted devices
• Discrete power semiconductors
• 

Ideally suited for COTS (commercial off the shelf) military applications, the MS-Series features a durable metal and sealed mounting bushing with MIL-PRF-39019F ingress protection when mounted in a panel.

This class-leading, affordable circuit breaker was also designed in accordance with the requirements of MIL-PRF-55629 and MIL STD 202, making it the best choice when application consideration includes shock, vibration, moisture resistance, salt spray, and thermal shock.

The MS-Series' compact size and reliability make it ideal for ruggedized communication equipment and other mission critical equipment.

The Bergquist Company laucnhes its latest Gap Pad® product – Gap Pad® VO Ultimate.

Gap Pad® VO Ultimate is a robust, highly compliant product that is ideal for both small and large gap designs. The fiberglass carrier on one side of the material allows ease of rework, excellent handling characteristics and puncture resistance. Additionally the fiberglass carrier has a slight inherent tack, minimizing any shifting during assembly.

The conformable and elastic nature of Gap Pad® VO Ultimate allows excellent interfacing and wetout characteristics, even to surfaces with a high degree of roughness or uneven topography.

The construction of Gap Pad® VO Ultimate; one side has high inherent tack, while the other side has minimal tack. This combination is useful for manual and automated processes.

Typical Applications Include

• Various IC Packages
• Thermally enhanced BGA packages
• Between heat generating semiconductors and a heat sink
• Computers and peripherials
• Telecommunications
• Power Conversion
• Automotive
• LED lighting packages

Contact us for further information, or view all Bergquist parts.

WAGO Introduces "ETHERNET 2.0" Programmable Fieldbus Controller

The 750-881 PFC interfaces with standard network protocols, including unique support for both EtherNet I/P and MODBUS TCP. The Ethernet switch streamlines costs and system footprint by facilitating a line topology for fieldbus wiring, eliminating additional switches and hubs. An onboard DIP switch configures the last octet of IP address/assignment, expediting commissioning.

WAGO Corporation’s high-speed 750-881 “ETHERNET 2.0” Programmable Fieldbus Controller processes 1000 instructions/235 µS. The first from WAGO’s upcoming “ETHERNET 2.0” line, 750-881 provides significant amounts of memory for PLC programs and Web applications, as well as an integrated dual-port Ethernet Switch. To keep pace, independent Ethernet ports respond in 1ms, transmitting real-time information to production and enterprise management.

Keys to the 750-881’s high-frequency processing are a 32-bit CPU and 1Mbyte of program memory. A 2Mbyte Fast File System supervises both a Web-Based Management System and substantial data logging. E-mail capability (updates/alarms) is also provided for authorized personnel. 750-881’s standard CoDeSys V2 programming environment is IEC 61131 compatible, and features all five programming languages. The PFC supports up to 250 I/O modules, and allows users to tailor solutions from the 400+ analog, digital and specialty modules in the WAGO-I/O-SYSTEM.

The 750-881’s new housing design departs from WAGO’s traditional architecture. The slotted housing optimizes heat dissipation while maintaining a 0°C–+55°C operating temperature range and IP20 rating. Certifications include UL 508, cUL, GL and CE.

Contact us for further information, or view all wago parts.

SunLED welcomes the PixsoLED XZxx53W-8 Series

    Great things come in small packages. If you haven't heard that saying before, you better believe it now. SunLED welcomes you to prepare your eyes for a look at our new 0603 SMD with a done lens. With its 1.6mm x 0.8mm footprint and 0.95mm height, the PixsoLED is a bright source of directed light from a package small enough to lose if you just blink too hard.

    Its 60° narrow viewing angle allows for greater intensity output so not only can you stop worrying about light bleed across light pipes, you don't need a brighter die to get the brightness you want out of a standard chip type LED. On limited real estate, the PixsoLED is an excellent choice for those wanting a high-visibility indicator - where good form follows with greater function. Its pixel-like qualities make it an ideal LED for a wide range of applications such as signs and indoor displays to hand held device indication and membrane switches on appliances.

Product Features:

Small form factor: 1.6 x 0.8mm, 0.95mm height

Narrow angle of emission: 60°

Low Current/High Output: Up to 3,000mcd @ 20mA

Available colors: Red, Yellow, Orange, True Green, Yellow-Green, and Blue.

Contact us for further information or view all SunLED parts.

Carling Technologies is pleased to announce the release of the new G-series, hydraulic magnetic circuit breaker.

This product is designed for use in DIN rail applications, and is suitable for domestic and international use as it meets IEC spacing requirements (TUV/CCC approvals pending) and has UL 1077 and CSA agency approvals. The G-series is rated up to 63 Amps, has a conventional 17.5 mm form/fit DIN rail breaker housing and is available in 1 to 4 poles.

Features:

•an optional integrated auxiliary switch embedded within the breaker. The optional auxiliary switch does not require a separate housing, or pole. As a result, the G-series takes up less panel space than the other brands.

•utilizes hydraulic/magnetic technology, which provides precise circuit protection operation and performance even when exposed to extremely hot and/or cold application environments. Many other DIN rail breakers utilize a thermal bimetal element requiring a de-rating factor to prevent nuisance tripping in hot environments, or a potentially destructive long delay in cold environments.

Contact us for further information, or view all carling parts.

The Bergquist Company launches its latest Sil-Pad product- Sil-Pad 1200.

• Thermal impedance: 0.53°C-in2/W (@50 psi)
• Exceptional thermal performance at lower application pressures
• Smooth and non-tacky on both sides for easy re-positioning, ease of use and assembly error reduction 
• Superior breakdown voltage and surface "wet out" values
• Designed for applications where electrical isolation is critical
• Excellent cut-thru resistance, designed for screw and clip mounted applications

Sil-Pad 1200 is a silicone based, fiberglass-reinforced thermal interface material featuring a smooth, highly compliant surface.  The material features a non-tacky surface for efficient re-positioning and easy of use, as well as an optional adhesive coating.  Sil-Pad 1200 exhibits exceptional thermal performance at lower application pressures.  The material is ideal for placement between electronic power devices and a heatsink for screw and clip mounted applications.

Typical Applications Include

• Automotive electronics control modules
• Power supplies
• Motor controls
• Audio amplifiers
• Discrete devices
• Telecommunications

Contact us for further information, or view all Bergquist parts.

The Bergquist Company launches its latest S-Class gap filling material - Gap Pad 5000S35.

• High thermal conductivity: 5 W/m-K Highly conformable,
  "S-Class" softness
• Natural inherent tack reduces interfacial thermal resistance
• Conforms to demanding contours and maintains structural integrity with little or no stress applied to fragile component leads
• Fiberglass reinforced for puncture, shear and tear resistance
• Excellent thermal performance at low pressures

Gap Pad 5000S35 is a fiberglass-reinforced filler and polymer featuring a high thermal conductivity. The material yields extremely soft characteristics while maintaining elasticity and conformability.The fiberglass reinforcement provides easy handling and converting, added electrical isolation and tear resistance.The inherent natural tack on both sides assists in application and allows the product to effectively fill air gaps, enhancing the overall thermal performance. Gap Pad 5000S35 is ideal for high-performance at low mounting pressures. 

Contact us for further information, or view all Bergquist parts.

Carling Technologies Inc is pleased to announce the addition of the 1-50 Amp PC-Series circuit breaker to its ground fault circuit breaker product portfolio.

The PC-Series is suitable for:

•AC branch ground fault protection - a single circuit solution

•AC main ground fault protection for a boat’s entire AC electrical system

•Portable generator ground fault protection

Key Benefits of the PC-Series:

•Increases safety around boats and marinas

•Protects against electrical shock hazards in areas near water

•Protects against defects in the wires & conductors

•Reduces fire and shock hazards from defects in permanently installed appliances such as water heaters, battery chargers, lighting fixtures, etc.

•Detects lower level ground faults which do not trip ordinary circuit breakers, but can lead to fires, and shock hazards for boating occupants

Innovative Features:

These precision mechanisms are temperature stable and are not adversely affected by temperature changes in their operating environment. As such, derating considerations due to temperature variations are not normally required, and heat-induced nuisance tripping is avoided.

•Overload, short circuit and ground fault protection in a single package

•Handle style actuators and rocker style "acuguard”

•Wiping Contacts - Mechanical linkage with two-step actuation – cleans contacts, provides high, positive contact pressure & longer contact life

•A trip-free mechanism, a safety feature, makes it impossible to manually hold the contacts closed during overload or fault conditions.

•A common trip linkage between all poles, another safety feature, ensures that an overload in one pole will trip all adjacent poles.

•Front panel mounting

•Integral push-to-test button

•Two integrated LED indicators distinguish if a breaker is closed with Line Voltage present, or has opened due to leakage current, or has opened due to over current, or is closed with no Line Voltage present.

 Contact us for further information, or view all Carling parts.

The Bergquist Company announces the latest addition to its family of thermally conductive phase change materials.

• Thermal impedance: 0.18°C-in2/W (@25 psi)
• Natural tack for ease of assembly
• Exceptional thermal performance in an insulated pad

Hi-Flow 330P is a thermally conductive phase change material featuring a natural tack on one side and reinforced with a polyimide film. The polyimide film provides a high dielectric strength and cut through resistance. Hi-Flow 330P offers excellent handling and consistent liner peel-off characteristics. The material is designed for use between a high power electronic component requiring electrical isolation and its heat sink.  Hi-flow 330P's thermal performance is exceptional with a thermal impedance of 0.17ºC-in²/W at 50 psi. Bergquist recommends the use clips or springs for phase change materials to assure constant pressure between the component interface and the heat sink.

Contact us for further information, or view all Bergquist parts.

SoLiCo 68 Series Splashproof Indicators
Now Available in 480 & 600 VAC

Specifications

Material: Nylon
Lens Material: Polycarbonate
Bezel Material: Stainless Steel
 Panel Thickness: 0.30" to 0.093"

The new 68 Series features snap in mounting in panels from 0.030” to 0.093” with a 0.500’ diameter mounting hole. Most models feature cRUus, TUV, and CE certifications for electrical ratings up to and including 600VAC. Standard illumination is available with LED, incandescent, or neon lamps. Custom illumination can be provided with daylight visible LEDs for special applications. Ratings are available from 2VDC to 28VDC for LEDs, 6V to 39V for incandescents, and 125VAC to 600VAC for neons.  Available terminations on the 68 Series are .187 and .250 quick connect tabs, all voltages up to and including 250VAC and wire leads for all voltages. Special wire colors and temperature ratings can be specified for custom installations.

The 68 Series offers several lens options in all the standard colors, both transparent and translucent. There are three flat raised lenses with heights of 0.05”, 0.20”, and 0.41”. There is also 0.39” diameter and a 0.49” diameter domed lenses a flush lens and a map light lens cover.

The 68 Series is a versatile indicator that is used in applications such as food equipment, medical, industrial, marine, and transportation, and consumer products.

Contact us for further information, or view all Solico parts.

HTWM Hall Effect Miniature Proportional Thumbwheel

    The HTWM, Hall Effect Miniature Proportional Thumbwheel, has been released to production. The HTWM offers the same performance as the standard HTW Hall Effect thumbwheel but with a much shorter behind panel depth. Available with 8 output options, a self centering, single axis, thumbwheel actuator that provides linear change in voltage output in either direct from center. Rocker style mounting and a 3 million cycle rotational life. The electronics are sealed to IP68S and the switch provides excellent EMI/RFI immunity, ideal for use in grip, armrest and panel applications.

Contact us for further information, or view all OTTO parts.

JHT Miniature Hall Effect Joystick

  The JHT-00004 joysticks compact design, with a behind panel depth of 19mm, and robust construction is the ideal solution where space is limited and precision control is required. Built for rugged and tactical environments, its applications include; robotics, construction equipment, hydraulic controls, medical and surgery equipment, security and video cameras. Utilizing Hall Effect contactless technology the JHT-00004 has been tested to 1 million cycles with no degradation of electrical performance or boot wear. The electronics are sealed to IP68S and the EMI/RFI withstand are per SAE J1113 specifications.

Contact us for further information, or view all OTTO parts.

Introducing S-Series Rocker Switch

Carling Technologies is pleased to introduce the S-Series rocker switch, designed for use in the enclosed cabs of today’s trucks, providing the vehicle operator with easily recognizable and simple to operate controls.

FEATURES:

• Abbreviated travel ½ throw actuators

• Ergonomic rockers

• Illumination in up to three detent switch positions

• A non-teasable snap action circuit

• 10A, 24VDC rating

• Space saving compact envelope with clean bezel-less design

• Integrated low insertion force connector and polarized switch base for quick installation

• Illumination and switch circuitry is easily accommodated with the 10 terminal base 

These great features, combined with over 1000 available laser etched or padprinted legends, allow the S-Series to be seamlessly incorporated into just about any cab interior environment.

 Contact us for further information, or view all Carling parts.

Introducing N-Series Addressable Rocker Switches

Carling Technologies is pleased to introduce the N-Series Addressable Rocker Switch.

FEATURES:

• A flexible, cost effective alternative to a CAN/LIN based switch, with the look and feel of a traditional Electro-mechanical control coupled with a built in PCB.

• Wiring harness simplification, allowing specific loads to be controlled from any location within a vehicle cab.

• Produce up to 144 individual switch IDs by using a resistive ladder circuit. Different switch IDs are achieved by changing the resistor values tied to individual loads. Each load can then be assigned to the specific functions that the switch is controlling. Each switch is connected to an ECU and the application software is written to recognize the switch IDs to determine which load is being controlled as well as the selected actuator position.

• Rearrange switch locations without the need for costly and time consuming harness redesign, giving designers the ultimate in flexibility.

 Contact us for further information, or view all Carling parts.

Introducing the New Carling H-Series Hydraulic/Magnetic Circuit Breaker

Carling Technologies is pleased to announce the latest addition to our product portfolio, the H-Series hydraulic/magnetic circuit breaker.

Features:

•Provides reliable circuit protection in a low cost compact package, a single pole unit has a length of 1.732", width of .630", and a height of 1.654"

•Meets IEC spacing, making it an ideal choice for your international market applications

•Designed to meet UL489A, UL1077, CSA, C22.2 and EN60934

•Contains a “trip-free” mechanism - the contacts will open when a fault condition occurs, even if the handle is held in the ON position

 Contact us for further information, or view all Carling parts.

Devices Available to Support Operating Temperatures Ranging From -65 Degrees C to +250 Degrees C

  San Marcos, CA, April 30, 2010 -

Sullins Connector Solutions, Inc., a leader in the design and manufacturing of RoHS-compliant board level interconnect products, has expanded their comprehensive portfolio of high-temperature devices to include Hi-Temp 0.100" (2.54 mm) contact centerline male headers that support an operating temperature range of -65 degrees C to +150 degrees C.  The new single- and dual-row Hi-Temp headers are offered to complement Sullins' full series of Hi-Temp dual-row card edge connectors which support an operating temperature range of -65 degrees C to +250 degrees C, and are provided in 0.039" (1.0 mm), 0.050" (1.27 mm), 0.100" (2.54 mm), 0.125" (3.18 mm) and 0.156 (3.96 mm) contact centerline versions.   Engineered to provide unparalleled design flexibility and manufacturing efficiency, parts may be ordered in dip solder, wire wrap, right angle bend, and card extender termination styles, as well as in straight and right angle plated through hole (PTH) and surface mount (SMT) versions.  Available mounting styles include clearance holes, flush mounting, threaded inserts, straddle mount, floating bobbin, side mounting and open card slot.  The new headers are available with varied head and tail length options to permit custom and standard applications.  Materials are UL94V-0 rated and withstand reflow processes up to 260 degrees C peak for 120 seconds max.

Intended for employment in high-density applications in which board spacing and total weight are factors, Sullins' Hi-Temp card edge connectors and headers are ideal in a wide array of consumer, industrial, and commercial applications.  They are most frequently used in test and burn-in oven facilities, electronic component testing, communication equipment, medical equipment instrumentation, power converters and power supplies, along with aerospace and automotive systems and products.

The Hi-Temp card edge connectors and new, Hi-Temp headers feature a current rating of from 1 A to 3 A maximum per contact.  Dual-row card edge connectors are offered with from 2 to 120 contacts per row, whereas headers are provided in single- and dual-row configurations with 1 to 36 contacts per row.  Devices are supplied with full gold or selective gold plating options.   Parts boast a high mating cycle of 500 cycles minimum.

 Contact us for further information, or view all Sullins parts.